Client used to have dedicated methods for different icon sizes instead
of combining all pixmaps into one QIcon. This resulted in various parts
of KWin having different access to the icons:
* effects only got one pixmap of size 32x32
* decorations only got the 16x16 and 32x32 pixmaps combined into a QIcon
* tabbox could request all icon sizes, but only as pixmap
Now all sizes are available in one QIcon allowing to easily access the
best fitting icon in a given UI.
With QtQuick2 it's possible that the scene graph rendering context either
lives in an own thread or uses the main GUI thread. In the latter case
it's the same thread as our compositing OpenGL context lives in. This
means our basic assumption that between two rendering passes the context
stays current does not hold.
The code already ensured that before we start a rendering pass the
context is made current, but there are many more possible cases. If we
use OpenGL in areas not triggered by the rendering loop but in response
to other events the context needs to be made current. This includes the
loading and unloading of effects (some effects use OpenGL in the static
effect check, in the ctor and dtor), background loading of texture data,
lazy loading after first usage invoked by shortcut, etc. etc.
To properly handle these cases new methods are added to EffectsHandler
to make the compositing OpenGL context current. These calls delegate down
into the scene. On non-OpenGL scenes they are noop, but on OpenGL they go
into the backend and make the context current. In addition they ensure
that Qt doesn't think that it's QOpenGLContext is current by calling
doneCurrent() on the QOpenGLContext::currentContext(). This unfortunately
causes an additional call to makeCurrent with a null context, but there
is no other way to tell Qt - it doesn't notice when a different context
is made current with low level API calls. In the multi-threaded
architecture this doesn't matter as ::currentContext() returns null.
A short evaluation showed that a transition to QOpenGLContext doesn't
seem feasible. Qt only supports either GLX or EGL while KWin supports
both and when entering the transition phase for Wayland, it would become
extremely tricky if our native platform is X11, but we want a Wayland
EGL context. A future solution might be to have a "KWin-QPA plugin" which
uses either xcb or Wayland and hides everything from Qt.
The API documentation is extended to describe when the effects-framework
ensures that an OpenGL context is current. The effects are changed to
make the context current in cases where it's not guaranteed. This has
been done by looking for creation or deletion of GLTextures and Shaders.
If there are other OpenGL usages outside the rendering loop, ctor/dtor
this needs to be changed, too.
It's basically a run of the port-cmake.sh script in here, mostly the changes
are the following:
- Using KF5::* targets
- Using the proper macros, following recent developments in frameworks
Hiding and Showing the close window button all the time can result in
the window not having a proper content. To fix this issue we keep the
window around, but just don't show it. For this the CloseWindowView
inherits from QObject and delegates the needed calls to the nested
QQuickView.
* KDE/4.11:
Remove assertion in KDecorationUnstable's constructor.
SVN_SILENT made messages (.desktop file)
Cursor Theme KCM: Show correct resize cursor in preview for themes without a file called "size_fdiag"
Fixed missing signal/slot connection:
Fix zoom effect cursor position on initial zoom in.
SVN_SILENT made messages (.desktop file)
Don't show borders for a maximized Laptop client
Always use PositionCenter for maximized windows
Fix click on trash plasmoid when on desktop and widgets are unlocked
Conflicts:
kwin/clients/aurorae/src/aurorae.cpp
kwin/libkdecorations/kdecoration.cpp
plasma/desktop/applets/trash/trash.cpp
plasma/desktop/toolboxes/plasma-toolbox-desktoptoolbox.desktop
plasma/desktop/toolboxes/plasma-toolbox-paneltoolbox.desktop
plasma/generic/wallpapers/color/plasma-wallpaper-color.desktop
plasma/generic/wallpapers/image/plasma-wallpaper-image.desktop
As KWin indirectly uses Qt's OpenGL through QtQuick we need to ensure
to not mix OpenGL and OpenGLES. So we have to built KWin only against
OpenGL if Qt is built against OpenGL and we have to built KWin only
against GLESv2 if Qt is built against GLESv2.
This means the kwin_gles binary is no more. There is only kwin which
either links GL or GLESv2.
with 4 instead of just altering the default value
It seems the value is actually written for some ppl.
Worse: former patch didn't actually work as expected
anymore
CCBUG: 321897
That's what you get for changing code you cannot properly test. The
calculation was completely messed up. Now reads the correct byte size
for the byte array. In addition the usages in the effects are improved
to cast the data into the proper uint32_t values instead of the more
generic long. After all if the format is 32, the length is 32 and not
a long.
compensated by a QuartOut shape, this keeps the
effect alive while the sheet or similar effects run
without much visual stretch
Covers issue until there's AnimationEffect::determine()
CCBUG: 321897
semi Fixed in 4.11.2
REVIEW: 111798
When a window is added while the effect is running
it shall either be highlighted or hidden, but not exit
the effect what happened, because the property notification
is invoked to test whether the window has a highlight
property (questionable since the effect is running, but
valid - could be different X11 client) and that routine
exits the effect if no property is found (assuming it was
withdrawn)
REVIEW: 112494
With the fixed KPluginFactory macro, the KWIN_EFFECT_CONFIG_* macros
seem to break. I'm looking for a solution to fix up the macro in
kwineffects.h, or otherwise the usage in the plugins.
The problem is that the macros of each plugin export the exact same
class name, which is going to clash.
Until I've found a solution, disable build of the config files, so it's
not too disruptive for others.
CCMAIL:kwin@kde.org
Not sure why kdeclarative gets its own subdir, nor why
there is no CMake module to to add it to the include dirs
on find_package, but this matches what plasma-framework
does at the moment.
insufficient since there can be windows/content on top of the
moved window and the labels are painted on top of the scene
BUG: 318390
FIXED-IN: 4.11
REVIEW: 111861
* "" needs to be wrapped in QStringLiteral
* QString::fromUtf8 needed for const char* and QByteArray
* QByteArray::constData() needed to get to the const char*
Instead have a synthetic motion after the effect started
and explicitly set the selected window on click/drags
BUG: 314840
BUG: 314715
FIXED-IN: 4.11
CCBUG: 314717
REVIEW: 111276
Eg. gtk+ alters the modality after mapping and
before unmapping the window.
Therfore the former implementation ahd a wrong idea
about the modality until the window was activated and
again had a wrong idea when the dialog closed, keeping
the main client dimmed.
Modality changes at runtime are uncommon but legal and can
happen anytime.
BUG: 321340
FIXED-IN: 4.11
REVIEW: 111154
Supported Features:
* move/resize
* active/inactive
* special window type
* window decoration as missing in AnimationEffect
The animations are cancelled when they go into an invisible state (e.g.
desktop changed, minimized) and are set again when the window becomes
visible.
Where a transition is useful, the window gets animated, e.g. start/finish
of move resize.
BUG: 294856
FIXED-IN: 4.11
REVIEW: 110747
Cross fading with previous pixmap is achieved by referencing the old
window pixmap. WindowPaintData has a cross-fade-factor which interpolates
between 0.0 (completely old pixmap) to 1.0 (completely new pixmap).
If a cross fading factor is set and a previous pixmap is valid this one
is rendered on top of the current pixmap with opacity adjusted. This
results in a smoother fading.
To simplify the setup the AnimationEffect is extended and also takes care
about correctly (un)referencing the previous window pixmap. The maximize
effect is adjusted to make use of this new capabilities.
Unfortunately this setup has a huge problem with the case that the window
decoration gets smaller (e.g. from normal to maximized state). In this
situation it can happen that the old window is rendered with parts outside
the content resulting in video garbage being shown. To prevent this a set
of new WindowQuads is generated with normalized texture coordinates in
the safe area which contains real content.
For OpenGL2Window a PreviousContentLeaf is added which is only set up in
case the crass fading factor is set.
REVIEW: 110578
This effect is controlled by KScreen. It fades out all windows when
KScreen requests this and gives feedback to KScreen once all windows are
faded out. This allows KScreen to adjust the screens in a flicker free
way.
REVIEW: 110661
BUG: 319994
FIXED-IN: 4.11
Shader moved to 1.10 subdirectory and a new version for 1.40 added.
At the same time call to glPolygonMode removed as it caused errors with
core context (and seems to not be needed).
REVIEW: 110572
Shaders are moved into dedicated directories 1.10 and 1.40. 1.10 contains
the already existing versions, 1.40 copies of them adjusted to GLSL 1.40.
REVIEW: 110571
With the removal of BoxSwitch all effects which want mouse events use the
fullscreen input window. The available functionality is too complex both
in EffectsHandler and in the Effects.
With this change only fullscreen input windows are supported and all
effects share the input window. This means there is at maximum one input
window. This simplifies the code in the Effects as they don't have to
keep track of the window they created any more. In EffectsHandler it
means that only one window needs to be created, destroyed and raised.
Also it means that we can properly react on screen size changes which had
been ignored in the past. Also quite some roundtrips to X are no longer
needed as we do not need to query the window geometry when creating the
input window.
REVIEW: 110156
The non-composited part handles the showWithX case with the four small
windows. The composited part shows a translucent QWidget with the
FrameSvg as done by the selection effect frame.
Outline connects to the Compositor toggled signal to switch the mode if
compositing gets suspended/resumed. This works fine also in the case that
the switch happens while the outline is shown. To support this Outline
is now a QObject and created with Workspace as a parent.
Given that the Outline handles both cases by itself, the outline effect
is no longer needed and is dropped together with all the hooks into the
effect system.
The usage has always been questionable as the thumbnails are
too small to properly recognize something.
Now BoxSwitch Effect has reach its end of life which would have
required to keep most of the code just for this thumbnail bar.
If required it would be better to integrate the normal QML based
TabBox to be rendered together with an effect.
BUG: 296070
FIXED-IN: 4.11.0
Tried to build KWin with enable final: it doesn't work. So if nobody uses
it, we don't need it in the CMakeLists to make it work.
Also it's removed in KF5 which means that removing it right now removes
differences in the build system.
REVIEW: 109357
Many headers included KLocale to use i18n and co. But those methods are
defined in KLocalizedString and not in KLocale.
With KF5 klocale.h does no longer include KLocalizedString causing lots
of compile errors.
Using a lib variable for:
* own libs
* qt libs
* kde libs
* xlib libs
* xcb libs
and link those groups together in target_link_libraries. This should
make the code easier to read and easier to support in future for some
time both Qt4 and Qt5.
Main motivation for this rewrite is the fact that the login effect had
been designed under the assumption that there is only one login splash
window. This assumption does no longer hold with the QML based splash,
which creates a window per screen.
By using a JavaScript based effect, the animation effect is implicityly
used which supports animating multiple windows at the same time in a
better and safer way.
BUG: 313061
FIXED-IN: 4.11
REVIEW: 108403
Where possible it is changed to Cursor::pos(), where we cannot use the
Cursor class (e.g. Aurorae) we can at least try to limit the usage to
prevent roundtrips to the X server.
REVIEW: 109178
This includes:
* getting cursor image through xcb_xfixes
* using xcb_image_get for reading screen content in xrender case
* using xcb_put_image to upload the generated screenshot into shared xpix
Overall this means that QPixmap as an X Pixmap wrapper is no longer used.
The conversion from xcb_image_t to QImage still needs some code for not
matching byte order. I'm a little bit unsure about adding the code as I
would not be able to test it.
REVIEW: 109076
* use xcb_fixes_foo
* drop QX11Info - we don't need it in the effects
* use QScopedPointer for GLTexture/XRenderPicture
* remove commented code
* use kDebug instead of qDebug
Of course XCursor library is still used as there is no XCB replacement.
What could be considered is adding a getCursor hook into the
EffectsHandler as also the ScreenShot Effect is getting the cursor and
using XCursor doesn't seem future proof to me ;-)
Sorry for putting everything into one commit.
REVIEW: 109083
ScreenEdgesEffect failed compiling, mouseclick and zoom are yelling
warnings.
Compiling is tested with XRender enabled, for the disabled test I need to
wait for my Jenkins installation ;-)
Instead of having a pointer to a QPixmap the offscreen target holds an
xcb_render_picture_t. To make this possible in SceneWindow the tempPixmap
is changed from a QPixmap* to a XRenderPicture*. QPixmap was only used
for convenience.
ScreenShot Effect as only user of the offscreen target is adjusted but
as it needs a QImage, still uses a QPixmap wrapper.
X counts the middle button as 2 and right as 3, Qt as 4 and 2 resp. the flags
... we shall at least match our GUI ;-)
BUG: 314756
FIXED-IN: 4.10.1
REVIEW: 108883
happens when the polling misses the press when doing more
important things
also shortcut buttons == oldButtons
BUG: 314762
FIXED-IN: 4.10.1
REVIEW: 108883
X counts the middle button as 2 and right as 3, Qt as 4 and 2 resp. the flags
... we shall at least match our GUI ;-)
BUG: 314756
FIXED-IN: 4.10.1
REVIEW: 108883
happens when the polling misses the press when doing more
important things
also shortcut buttons == oldButtons
BUG: 314762
FIXED-IN: 4.10.1
REVIEW: 108883
and ensure to repaint labels for very tiny windows
Also move to LayerRepaints
BUG: 278137
FIXED-IN: 4.10.1
REVIEW: 108676
(cherry picked from commit 1365f04435f0bbbc74301988b778f7fdf1ad4fd8)
This feature has been superseded by the close window button and as it
is a rather destructive action it makes sense to remove it.
Sorry to everyone who used it.
CCBUG: 314393
REVIEW: 108851
EffectsHandlerImpl starts to monitor DBus for the screen being locked and
provides this information to the Effect system by allowing them to ask
whether the screen is currently locked and by emitting a signal when the
screen gets locked/unlocked.
This information is needed to ensure that no private data is shown on the
screen. The following effects are adjusted:
* taskbar thumbnails
* thumbnail aside
* mouse mark
* screen shot
BUG: 255712
FIXED-IN: 4.11
REVIEW: 108670
The main difference is that the activation of an edge is no longer
broadcasted to all effects and scripts, but instead a passed in slot of
the Effect/Script is invoked.
For this the EffectsHandler API is changed to take the Effect as an
argument to (un)reserveElectricBorder. As callback slot the existing
borderActivated is used.
In addition the ScreenEdge monitors the object for beeing destroyed and
unregisters the the edge automatically. This removes the need from the
Effect to call unregister in the dtor.
BUG: 309695
FIXED-IN: 4.11
First XRender effect which gets ported over. Therefore required bits are
added to CMakeLists.txt.
Port to xcb is luckily rather straight forward. Though the QPixmap usage
needs to be replaced by xcb_pixmap_t together with a XRenderPicture.
In effects it's obvious that compositing is enabled, so specifying the
translucent element is no problem.
In tabbox a context property "compositing" is injected which decides
whether "translucent" or "opaque" elements should be used. Here the
translucent elements are only used if the Blur effect is available - for
this a new Effect::Feature Blur is introduced and in addition it is
tested whether the theme provides the translucent element.
Also the masking is adjusted to ensure that only the shadow is not
blurred.
Reason for this change is that Plasma theme seems not always to pick up
whether compositing is used when used from inside KWin. It does not cover
the Desktop Change OSD which uses PlasmaCore.Dialog and there we cannot
(yet) inject that we use compositing.
Overall I'm quite unhappy with this patch and I do hope we can fix it in
the proper place in the lifetime of 4.10 and revert this patch.
CCBUG: 311995
REVIEW: 108438
This property can be used to check whether a window is currently visible
to the user, that is:
* not minimized
* on the current desktop
* on current activity
This is a common need for various effects.
REVIEW: 108341
Effect used the display size which caused windows being larger than
either width or height not to be captured correctly.
Now it uses the window size for the offscreen texture which also requires
to adjust the modelviewprojection matrix.
As an unrelated change the pointer to GLRenderTarget and GLTexture are
changed to a QScopedPointer and some variables which got moved around
are consted.
BUG: 312851
FIXED-IN: 4.11
REVIEW: 108258
Following the approach of ShowPaint effect by tracking the actual painted
regions per window to determine whether the painted area intersects with
one of the thumbnails.
BUG: 306169
FIXED-IN: 4.10
REVIEW: 108289
Animation now completely based on the expandedGeometry which includes the
shadows and another repaint at the end of the animation is added to
ensure that there are no leftover shadows.
BUG: 312168
FIXED-IN: 4.10
REVIEW: 108255
Instead of each effect, which needs to announce support, having custom
code to create a property and set it on the root window, there is now a
common API in EffectsHandler to take care of this.
The methods takes care of creating the atom if it has not already done
and set the property on the root window. Furthermore it allows multiple
effects to announce the same property without getting in conflict with
each other.
As a further convenience the property is automatically removed when the
effect is unloaded, so less things an effect author has to care about.
REVIEW: 107815
The ownership for virtual desktops is moved from Workspace into a new
VirtualDesktopManager. The manager is responsible for providing the count
of virtual desktops and keeping track of the currently used virtual
desktop.
All methods related to moving between desktops are also moved from
Workspace to the new manager, though all methods related to Clients on
Virtual Desktops remain in Workspace for the time being. This is to have
the new manager as independent from KWin core as possible.
An rather important change for the handling of virtual desktops is that
the count and the id of a desktop is now an unsinged integer instead of
an integer. The reason for that is that we cannot have a negative count
of desktops as well as it is not possible to be on a desktop with a
negative identifier.
In that regard it is important to remember that a Client can be on a
desktop with a negative identifier. The special value for a Client being
on all desktops is handled by using -1 as a desktop. For the time being
this is not adjusted but instead of comparing the virtual desktop ids one
should prefer to use the convenient methods like isOnDesktop and
isOnAllDesktops. This would allow in future to internally change the
representation for on all desktops.
This method can be used to get the animationTime in case a configuration
class generated through KConfigXT is used. In general the configuration
stores the magic value 0 for a property "duration". This magic value
indicates that a hard-coded default value should be used.
So the common logic to test the stored value for 0 and then either pass
the stored value or the default value to animationTime is encapsulated
in this method in a generic way.
A MyEffect can use it in the following way:
animationTime<MyEffectConfig>(200);
BUG: 310646
FIXED-IN: 4.10
REVIEW: 107460
This was originally added by d467fc1bdbcf69bd6ef213bd909633c2edfb6878,
to prevent alpha ending up to be 0 with blending disabled. Apparently,
that was a driver issue that is no longer present.
REVIEW: 107090
A decoration can provide the AbilityAnnounceAlphaChannel in addition to
AbilityUsesAlphaChannel. If this ability is provided the decoration can
enable/disable the use of the alpha channel through setAlphaEnabled().
The base idea behind this mechanism is to be able to tell the compositor
that currently alpha is not needed. An example is the maximized state in
which the decoration is fully opaque so that there is no need to use the
translucency code path which would render all windows behind the deco.
In addition also the blur effect honors this setting so that behind a
known opaque decoration no blurring is performed.
Oxygen is adjusted to disable translucency in maximized state and Aurorae
is adjusted to allow themes to enable/disable translucency. For Plastik
translucency and with that also blurring is disabled.
REVIEW: 106810
Port the KCM to use KConfigXT which means that the complete custom code
for loading, saving and setting to defaults can be dropped.
Also in the effect in brings some advantages as we basically get compile
time checks whether the accessed config is named correctly.
The saved values for translucency are now UInts in [0,100] instead of
doubles in [0.0,1.0], so an update script is needed.
REVIEW: 106310
The current API call to animate a window does not feel very JavaScripty.
Therefore a new method "animate" is added to the global scope, which
takes a JavaScript object of the following structure:
{
window: EffectWindow, /* the window to animate, required */
duration: int, /* duration in msec, required */
curve: QEasingCurve.Type, /* global easing curve, optional */
type: Effect.Attribute, /* for first animation, optional */
from: FPx2, /* for first animation, optional */
to: FPx2, /* for first animation, optional */
delay: int, /* for first animation, optional */
animations: [ /* additional animations, optional */
{
curve: QEasingCurve.Type, /* overrides global */
type: Effect.Attribute,
from: FPx2,
to: FPx2,
delay: int
}
]
}
At least one animation needs to be specified either on the root level
or in the array of animations. Curve is the only property on root level
which is used in the animations, if not provided.
REVIEW: 107079
Boxswitch is activated as tabbox, possibly due to a downstream issue
This results in multiple effects being assigned to the tabbox and no
GUI way for the user to fix this.
Since the BoxSwitch effects nowadays only exists as sidearm for
coverswitch, the tabbox setting is now hardcoded and disabled in the
effect, making it completely impossible to accidentally use it as tabbox.
BUG: 303387
REVIEW: 106695
FIXED-IN: 4.9.3
The logic has already ensured that the ARBBlurShader can only be used
when using the OpenGL1 compositor, the OpenGL 2 compositor needs to use
the GLSLBlurShader.
This change moves the complete ARBBlurShader into a KWIN_HAVE_OPENGL_1
ifdef section.
As a side-effect the ::create method can now return a NULL pointer which
makes more sense then returning an ARBBlurShader in case that the
GLSLShader is not supported.
REVIEW: 106738
If the build option is enabled KWIN_HAVE_OPENGL_1 is passed as a compile
flag when build against OpenGL.
This compile flag is meant to replace the KWIN_HAVE_OPENGLES. So far code
has been ifdefed for special behavior of OpenGL ES 2.0 and to remove
fixed functionality calls which are not available in OpenGL ES 2.0.
With this build flag the fixed functionality calls which are only used in
the OpenGL1 Compositor can be removed and keeping the KWIN_HAVE_OPENGLES
for the real differences between OpenGL 2.x and OpenGL ES 2.0.
E.g. a call like glColor4f should be in an
glColor4f(1.0, 1.0, 1.0, 1.0);
while a call like glPolygonMode should be in an
glPolygonMode(GL_FRONT_AND_BACK, GL_LINE);
Building for OpenGL ES 2.0 of course implies that KWIN_HAVE_OPENGL_1 is
not defined.
Given that the Catalyst driver is now supporting direct rendering and by
that can use the OpenGL 2 code path we do no longer need to force
disable the Blur effect and Lanczos filters which used to crash in the
ARB shader path.
The ARB shader path - which can only be used in OpenGL 1 - is kept
disabled for Catalyst.
CCBUG: 270818
CCBUG: 286795
REVIEW: 106798
The ShaderBinder class can be used for the case that a block of code
should be executed with a given Shader being bound. This is useful for
all the cases where there is a if-block for OpenGL2 execution with a
Shader being pushed in the first line to the ShaderManager and popped in
the last line of the block. With the helper this can be simplified to:
ShaderBinder binder(myCustomShader);
or
ShaderBinder binder(ShaderManager::GenericShader);
The ctor of ShaderBinder pushes the given Shader to the stack and once
the helper goes out of scope it will be popped again from the stack.
In addition the helper can take care of OpenGL 1 compositing, that is it
just does nothing. So it can also be used where there is a shared OpenGL1
and OpenGL2 code path where the Shader should only be pushed in OpenGL2.
This basically removes all the checks for the compositing type before
pushing/popping a Shader to the stack.
REVIEW: 106521
The main usage of ShaderManager::isValid was to have OpenGL2 specific
code pathes. Now we have an actual OpenGL2Compositing type and we know
that the ShaderManager is valid if we have this compositing type and we
know that it is not valid on OpenGL1Compositing. This gives us a much
better check and allows us to use the isValid method just for where we
want to check whether the shaders compiled successfully.
In addition some effects require OpenGL2, so we do not need to check
again that the ShaderManager is valid. Such usages are removed.
The CompositingType enum turns into flags and two new values are
introduced: OpenGL1Compositing and OpenGL2Compositing.
Those new values are or-ed to OpenGLCompositing so that a simple check
for the flag OpenGLCompositing works in case of one of those two new
values. To make the generic check for OpenGL compositing easier a method
in EffectsHandler is introduced to just check for this.
The scenes now return either OpenGL1Compositing or OpenGL2Compositing
depending on which Scene implementation. None returns OpenGLCompositing.
Left over from the cleanup which basically resulted in the active window
being put to the inactive's window opacity.
Thanks for the early notification of that issue.
BUG: 306449
FIXED-IN: 4.9.2
The effect should have had two animations:
* on move resize
* on active/inactive change
But the timeline was adjusted in the prePaintWindow call and the timeline
is effect global and not per window. Which means that for each window the
same time is added. So instead of adding time t each frame t*n with n
being the number of windows got added. So in most cases the animation
ended in the first or second frame which means its not visible.
Through git blame I was able to track down that this incorrect behavior
was introduced in 2008. An animation broken for more than four years
without anybody noticing is probably not required. Because of that it's
dropped from the effect. As this includes quite some code and performance
improvements it goes into the release branch.
A better solution could be implemented, but that should be for 4.10.
BUG: 306263
FIXED-IN: 4.9.2
REVIEW: 106335
There were quite some useless checks like e.g. first checking whether
a window is the desktop and taking a different code path for that case
and in the other code path checking again.
Also using the new introduced boolean values for the checks instead of
comparing floating point numbers all the time.
The effect gets a set of boolean values to check whether it is active for
one of the categories (e.g. move resize, decorations).
This allows to easily check whether the effect is active at all, that is
if all values are at 1.0 the effect will never affect a window.
In all other cases it can be combined with looking at the available
windows to e.g. enable the effect for move resize only when there is a
window which is either moved or resized. This check is performed whenever
an action happens which could cause a window to become inactive.
BUG: 306262
FIXED-IN: 4.9.2
The Shader might have left-overs from last usage which might
cause the effect to not work properly.
BUG: 304404
FIXED-IN: 4.9.1
Reviewed By: Thomas Lübking
The supportInformation is extended to also read the properties
on all effects. In addition each effect can be queried just for
itself through D-Bus, e.g.:
qdbus org.kde.kwin /KWin supportInformationForEffect kwin4_effect_blur
All effects are extended to provide their configured and read
settings through properties. In some cases also important
runtime information is exposed.
REVIEW: 105977
BUG: 305338
FIXED-IN: 4.9.1
The code assumed that screens border to each other. That is the height
of the one screen is the y position of the other screen.
BUG: 304520
FIXED-IN: 4.9.1
REVIEW: 105958
* KDE/4.9:
Fix callback race in the session save and shutdown code.
Update for 4.9.0 release
SVN_SILENT made messages (.desktop file)
SVN_SILENT made messages (.desktop file)
Fix regression in QML shutdown menu. Ampersands should be removed from menu entries' text by default.
Fix typos in a message that broke string freeze.
Fix potential parallel build failure.
Conflicts:
CMakeLists.txt
Ensures that we can access the minimized property in Effects
which want to not animate a closed, minimized window.
Make use of it in the Fade Effect Script to not fade out a
minimized window which would mean showing the actual not
visible window.
BUG: 303891
FIXED-IN: 4.9.0
REVIEW: 105647
The public member variables for opacity, saturation and brightness
are removed in favor for getter and setters. The variables are
moved into a private class. Those are now qreal instead of double.
To make usage inside the effects easier a multiply method is added
which multiplies the current value with passed in factor and returns
the new value in a functional programming style.
This commit is the top-most of a patch series to refactor
ScreenPaintData and WindowPaintData. Other related commits are:
* 0811772
* ebdc7ec
* 2c8dd8d
* 7699726
* 68e0201
* 611cb09
REVIEW: 105141
BUG: 303314
FIXED-IN: 4.10
No effect has ever made use of contents opacity. Which means it
is not needed. Removing means faster effects as we used to
multiply the value (always 1.0) with the opacity in each frame
for each window.
The logout effect was rather broken. First of all it was
excluded from build if OpenGL ES is present at build time. The
reason for this is that the effect did not work with GLES.
In order to fix that the vignetting is ported over to OpenGL 2
by using a dedicated shader. As well the lod based blur is
added through a dedicated shader and uses framebuffer blit to
get the current rendered buffer before rendering the logout
window into a texture.
Last but not least the isActive method was broken and is fixed
by checking whether the logout window is around.
BUG: 303096
FIXED-IN: 4.9.0
REVIEW: 105459
Cube effect modifies the ScreenTransformation matrix. While each
window resets the matrix on a global level it's not reset. That
means if the last rendered window had the screen rotated the
ScreenTransformation keeps the rotation even after the cube
ended. This causes a rotated window in e.g. TaskbarThumbnails.
REVIEW: 104918
CCBUG: 299869
Effects can specify their minimum requirements in their
desktop file:
* OpenGL
* OpenGL 2 (GLSL required)
* Shaders (either ARB or OpenGL 2)
The configuration module uses this information in combination
with which backend KWin is currently using. So if e.g. OpenGL
is used and an effect requires OpenGL 2 a detailed error
message can be showed that OpenGL 2 is required.
BUG: 209213
FIXED-IN: 4.9.0
REVIEW: 104847
A CMake variable is used to specify the name of the binary.
By default this is "kwin" but building for PA changes the
name to "kwinactive". The variable adjusts all names, e.g.
kwinnvidiahack becomes kwinactivenvidiahack.
The remaining usage of kwinrc in core and libs is replaced
by a cmakedefine for the configuration name and all data
installations are moved to the defined name. Dynamic loading
for scripts & co is adjusted for loading based on defined name.
This change allows the side-by-side installation of both kwin
for desktop and kwin for Plasma Desktop without the known
issues like conflicts in config files or missing build options
if kwin desktop is used for Plasma Active.
Likewise the KCMs are not adjusted as they are not intended to
be used for kwinactive.
REVIEW: 104299
BUG: 296084
FIXED-IN: 4.9.0
CCMAIL: active@kde.org
Additional TabBox Mode which allows to switch between all open
windows of the current selected application. By default Alt+tilde
is used which is on qwerty just one key above tab. For non-qwerty
layouts the shortcut is unfortunately not convenient.
REVIEW: 104730
FEATURE: 299308
FIXED-IN: 4.9.0
Effects that need GLSL require that OpenGL 2 is active.
It does not matter whether the GPU would support it if
OpenGL 2 is not used.
Cherry-picked from db42152
CCBUG: 299426
Creating an EffectFrame requires I/O which takes on my system
during testing between 10 and 40 msec. Also it needs a little
bit of memory.
This changes moves out the creation of EffectFrames at Effect
load till the Effect actually needs the EffectFrame. E.g. if a
user does not filter in PresentWindows there is no need to ever
create it.
BoxSwitch effect is ignored as it should be dropped for 4.9.
REVIEW: 104815
Cube effect loads 0 to 2 textures which has been
performed during configuration. This change delays
loading the textures till cube is activated for the
first time and the loading from file is moved into
a thread.
This means that for a very short time the texture
is not yet visible, but this is not a problem as
the cube animates from fully opaque starting state.
So during the loading the texture would not be
visible anyway.
REVIEW: 104807
This makes kwin in OpenGL2 mode more coherent with kwin_gles.
Despite some fullscreen effects they should now make the same
(pure) OpenGL calls.
REVIEW: 103804
Some old restructuring caused -DKWIN_HAVE_OPENGLES to no longer be
passed to the compiler, causing OpenGL-specific code to be built
while the libraries to link it were not available.
REVIEW: 104558
For the normal TabBox the TabBoxClient's icon method is
adjusted to use the "user-desktop" icon instead of the
window icon.
For the effects a method to set the caption is extended
to also set the icon on the caption frame.
REVIEW: 104444
FlipSwitch can be navigated with up and down keys as well
as left/right and CoverSwitch only with left and right
keys while Alt+Tab is used.
REVIEW: 104438
FEATURE: 178595
FIXED-IN: 4.9.0
Our first effect written in JavaScript to replace an existing C++
effect. Fade effect has been chosen as it has shown to be problematic
in the past and would have needed a migration to AnimationEffect anyway.
This reduces the repaints in cases where several blur regions are
stacked on top of each other (e.g. oxygen-transparent) and the topmost
layer needs to be updated (e.g. a blurry window is moved).
The old blur version wrongly marked a cache region as valid with the
reason that this region would never become visible. It didnt matter
because the only case that this region could become visible was a
movement of the window on top, which back then would have forced a
workspace repaint of that region and as such would have invalidated
the cache anyway. With the introduction of addLayerRepaint the
last point is no longer true and we have to track the valid cache
regions more carefully.
This patch adds a new function Toplevel::addLayerRepaint, that in contrast
to addWorkspaceRepaint does not invalidate every blur texture cache that
overlaps with that region. As the name suggests it rather invalidates the
to the window associated layer at that position. This is especially useful
in the case of move/resize events in combination with oxygen-transparent,
where the altered window is almost always the topmost window and the blur
texture cache of the windows underneath are unchanged.
For the case of fully opaque windows the behaviour of addLayerRepaint
and addWorkspaceRepaint should be same.
REVIEW: 103906
Most effects would not compile anymopre as they are not adjusted
to changes in the effect system (e.g. change to slots).
Also we have enough proper effects to no longer need some demo or
howto effects.
REVIEW: 103744
The effect did not check whether the ShaderManager is valid causing
a null pointer access when trying to use the shader.
Additionally this change moves the Shader init into the close window
slot as close window referrenced windows without checking whether the
effect would work. If the effect would not work each closed window
would be referrenced without any chance to being unreffed again as this
code is in a block checking whether the effect is valid.
BUG: 291390
FIXED-IN: 4.8.0
This is a condensed version of Martin's patch that fixes a high cpu
usage in KWin and X. It seems to be due to a window being created and
deleted at almost the same time, such that the fade effect never quits.
The bug was reliably reproducable with starting Amarok.
CCBUG: 290025
CCBUG: 288948
Too many crash reports in the fglrx driver when using ARB shaders.
It's a pity to disable functionality for all fglrx users, but it's
better than crash reports.
Blur effect can still be enabled manually and Lanczos can still be
enabled through the environment variable.
REVIEW: 103556
CCBUG: 270818
CCBUG: 286795
also
- replace QHash::operator[]
- replace double by float (-> ARM, and we don't need that precision)
- weaken some value checks ("== 1.0f")
- fix last paint of hiding windows (w->addRepaintFull() trap)
REVIEW: 103404
Finally it is possible :-) If it causes an impact on performance
during the release candidates I'm going to revert.
REVIEW: 103375
BUG: 255106
FIXED-IN: 4.8.0
Make use of new extension of protocol for magic number -1.
If offset is -1 KWin has to decide the offset. This fixes all the
incorrect animations and allows us to perform clipping again by
filtering out the window quads which should not be visible.
Additionally the effect now sanitizes the offset. That is for e.g.
Yakuake setting an offset of 0, but there is a strut on the top
corner causing Yakuake not to appear on 0, but with an offset of
the strut. Such cases are now considered as well and the animation
is fixed.
REVIEW: 103367
BUG: 287602
CCBUG: 261159
CCBUG: 278760
FIXED-IN: 4.8.0
The windows, that are considered to be always on top and that are on
all desktops, should also be always painted on top of everything while
switching the desktop.
This fixes graphical glitches that appear next to the borders of plasma
tooltips. Additionally I added a variable that forces the effect to
drop the cache, which might be useful in the future to fix bugs.
This should fix 2 issues with the blur effect:
- It is now sufficient to have a damaged EXPANDED blurArea to trigger
an update of the caching texture.
- No glitches in cases where the taskbarthumbnail effect paints a
thumbnail of a blurred window.
CCBUG: 288568
* BoxSwitch users are migrated to new QML TabBox thumbnails layout
* Thumbnail layout is new default (as before was BoxSwitch)
* Removed obsoleted settings from TabBox config
BUG: 283481
it's even worse, since it interferes with generally upscaled windows
(keeps them big, applies false transition and causes a final snapback)
and windata->highlight doesn't end at zero, so the entire screen is
still a little scaled when the effect ends (and snaps down afterwards)
now it snaps down when starting the leave what is better in general
and the only usable solution for upscaled windows.
some day presentwindows might be derived from the yet-to-add
animationeffect class ;-)
This patch introduces some kind of damage propagation. In the old version of the blur effect
we had to repaint the whole window if sth behind the blurred area was damaged. The new texture
cache, which was introduced by the last patch, gives us the opportunity to only update parts of
blurred background texture. This means that the damaged area can only propagate with the speed
of the blurring radius per window layer.
REVIEW: 102665
This caused situations in which the shader was pushed but never
popped from the stack as for the latter case there was a check
whether the effect is active.
BUG: 280455
This patch adds an optional texture cache to the blur effect such that damaged windows in
front of the blurred region dont trigger a repaint of the whole blurred region which pretty
often results in a avalanche repaint of nearly the whole screen.
REVIEW: 101977
This is actually a bloody hack by forcing the screen to be
repainted in each frame. This needs to be fixed in a different
way or we at least have to turn blur off by default for GLES in
the next release.
Each effect is able to declare itself as currently being active,
that is transforming windows or painting or screen or doing anything
during the current rendered frame.
This change eliminates the hottest path inside KWin identified by
callgrind.
REVIEW: 102449
Effect uses framebuffer blit to copy the zoomed are in a scaled
way into an offscreen texture and render the texture after the
rendering. This means instead of two rendering passes we now need
only one pass, but require the blit extension.
Due to changes in build system we have always either OpenGL or OpenGL ES.
This allows to remove the KWIN_HAVE_OPENGL_COMPOSITING define. In the
effects the define is kept as KWIN_HAVE_OPENGL which can be used in
future to build also an XRender only effect system.
BUG: 262543
pint desktop as background when including desktop in switcher
BUG: 262137
zoom windows as hover/selection indicaton (1/8 of the screen or 105%)
BUG: 215348
CCBUG: 175521
no closer on "show desktop" desktop
show closer immediately but have it disabled for a short time to allow the user realize it
REVIEW: 101318
If we have OpenGL ES but not OpenGL the KWIN_HAVE_OPENGL is set
causing the first compile pass to fail as it tries to build
against OpenGL. As a solution the first pass links against
OpenGL ES if OpenGL is not found.
This means both kwin and kwin_gles are built against GLES.
Nuno has to decide whether the new option will become default or not, for now it is disabled by default.
You can enable it in effects kcm, now Login effect has a configuration dialog.
It does not (yet) however check for non-fullscreen effects, so they might look weird when this is enabled.
REVIEW: 101812
CCMAIL: nuno@oxygen-icons.org
Reflection in a vertical multiscreen setup are kind of broken without
PaintClipper. But we have to ask ourselfe whether CoverSwitch in a
vertical multi screen setup makes sense and whether it's useful to
have reflections in such a setup.
Horizontal multiscreen setup works fine (also with reflections).
We have to set the bit depth of the XPixmap to 32 in order to get
an alpha channel and we have to render the grabbed image using
composition mode Source in order to just copy all pixels to the
destination pixmap.
BUG: 276719
FIXED-IN: 4.7.0
Since the funtionality of TopMenu did no longer work in KDE4 this feature was
removed from Workspace. Every reference to it was removed as well as commentaries
and documentation.
REVIEW: 101485
The uniforms textureWidth and textureHeight were only needed for
normal windows. For everything else it was just 1.0/1.0, that is
normalized.
The makeArrays method is changed to produce normalized texcoords
obsoleting the need for these uniforms. So two uniforms less, one
calculation in vertex shaders less and many many lines of code
removed.
At the same time makeArrays is also adjusted to take care of
yInverted of the texture, which is needed as we no longer can use
the enableUnnormalizedTexCoords which did the yInverted transformation.
REVIEW: 101646
Actually it's more a hack and should be addressed in the next
release cycle by allowing effects to modify the scene's blend
equation.
BUG: 274424
FIXED-IN: 4.7.0
For what reason ever motion manager thinks that windows are not
moving during the start animation (but are during the stop animation).
So we also have to look on the timeline to decide whether we should
disable lanczos filter on the windows.
Now wonder the animation was stuttering.
BUG: 274292
FIXED-IN: 4.7.0
Due to changes in the blur effect, the EffectFrame was flickering
with GLES. This can be worked around by doing full repaints whenever
a window is damagded while boxswitch is active with GLES. The problem
only occurs with the GLES backend due to the way how the buffers are
swapped.
BUG: 272688
With raster a QPixmap is no longer a XPixmap which fails all code
which assumes that an QPixmap is an XPixmap. Depending on were in
the codebase we either convert such pixmaps to images (OpenGL) or
create a XPixmap and use QPixmap::fromX11Pixmap to get a "real"
pixmap.
It is possible that there are more code pathes were we would need
a XPixmap. Currently tested is basic functionality of no-compositing,
XRender compositing, OpenGl/GLX and OpenGL ES/EGL compositing.
For OpenGL compositing raster might result in performance improvements,
for XRender it is possible that there are regressions when using raster.
By default KWin uses whatever is the default of the system, so we just
no longer enforce native.
Of course it is a bad idea to use graphicssystem OpenGL. As that
is broken anyways in Qt, we do not check for it.
Many thanks to Philipp Knechtges for bringing up the issue, convincing
me that we need it and providing most of the patch.
REVIEW: 101132
CCMAIL: Philipp.Knechtges@rwth-aachen.de
The new build option restricts the building of effects to those
useable for Plasma Active:
* blur
* dialogparent
* fade
* login
* outline
* presentwindows
* slidingpopups
* taskbarthumbnails
* screenshot
Additionally all effect KCMs are excluded from building in the
assumption that when building with this option, KWIN_BUILD_KCMS
is turned off.
CCMAIL: sebas@kde.org
Optimize the region of the screen that's painted in each frame,
and paint the windows top-to-bottom when the damaged region doesn't
intersect any blurred areas.
This fixes most of the rendering issues with cube in multi
screen setups and GLSL backend. For cylinder and sphere the
rendering of areas between screen is currently disabled if
using the GLSL backend. It needs adjustments to use another
vertex shader. Not sure if it is worth the effort.
also rewrite of the regular grid assignment - was
a) a suboptimal implementation
b) required because otherwise broken in desktopgrid proxy mode (which btw. polluted the effect through QHash::operator[])
BUG:262485
Warnings were:
glide.h:74:16: warning: possible problem detected in invocation of delete operator:
glide.h:74:16: warning: invalid use of incomplete type 'struct QTimeLine'
glide.h:28:7: warning: forward declaration of 'struct QTimeLine'
glide.h:74:16: note: neither the destructor nor the class-specific operator delete will be called, even if they are declared when the class is defined.
By making Dashboard Effect a fullscreen effect the blurring got
accidentially broken (blur ignores fullscreen effects). Reenabling
by setting the force blur role on the dashboard window(s).
Reapplied commit 629e17d18526ccfae3d3579066e8be927a92437d from KDE/4.6.
CCBUG: 259797
As this area was not repainted it caused visual garbage during
animationgs. Most visible with yakuake and a panel at the top.
Offset in that case is the upper screenedge while yakuake is
positioned below the panel. The area of the panel did not get
repainted causing the garbage.
CCBUG: 264765
The not initialized boolean value seemed to have evaluated to true
and causing the animation to stop and therefore the darkening not
to apply.
Giving a default value to the EffectWindow pointer doesn't hurt either.
Patch does not apply to 4.6 branch, because of that only in master.
BUG: 264552
FIXED-IN: 4.7.0
The branch contains the first step in reworking the kwineffects
library. This includes:
* replacing virtuals by signals and slots
* dropping some unused methods
* remove KWin::TimeLine
More to come.
Conflicts:
kwin/workspace.cpp
The KWin::TimeLine class was only a small wrapper around QTimeLine
without adding anything to QTimeLine what is not present in QTimeLine.
The initial idea was to make it possible to provide more curve shapes.
This is now obsoleted by Qt shipping more useful curves with QTimeLine.
So let's clean up a little bit and use QTimeLine directly instead of
the small wrapper.
All effects are adjusted to use QTimeLine directly.
First a signal is emitted when the user starts a move/resize operation.
During the move/resize operation each geometry change emits an update signal.
Last but not least a finish signal is emitted.
This eliminates the specific method for geometry updates in drawbound resize
mode.
The signal includes the state for horizontal and vertical maximize state.
It would be better to use the enum fro, KDecorationDefines but we don't want
to depend on decorations library.
Wobbly windows is adjusted to use this new signal - it is the only effect
interested in maximize state change.
This needs to be improved in core. Currently ClientGroup does not yet
emit signals, as it would be difficult to connect them. Nevertheless
the effects dependency should be removed.
EffectsHandlerImpl just forwards the signals from TabBox. In order
to have a valid pointer to the TabBox, the TabBox is now initialized
before compositing in Workspace.
